Agricultural Buildings

The steel structure agricultural building is mainly composed of H-section steel, C-section steel, and Z-section steel combination or construction frame and other components made of section steel and steel plate. Each structural building part is connected by welding, bolting, or riveting.

There are many factors affecting the construction cost to build a agricultural building, and issues such as raw materials, design, construction period, livestock facilities, are all factors that affect the cost of steel structure agricultural building.

You can provide your project and contact information and you will receive a quote within 1-2 days.

The concrete structure is suitable for multi-high-rise buildings with large loads and dense column networks (such as multi-store factory buildings, multi-store warehouses, office buildings, dormitories, etc.), as well as buildings with high requirements for fire prevention, corrosion resistance, or airtightness (such as chemical, Biomedical projects, etc.);

The steel structure is more suitable for large-span, large cantilevered single-story buildings (implement warehouse, cow shed, stable etc.) with smaller loads, and lower requirements for fire protection, corrosion resistance, or airtightness building.

1. High Strength And Light Weight
The strength of steel is high, and the modulus of elasticity is also high. Compared with concrete and wood, the ratio of density to the strength of steel is lower, so under the same stress conditions, the section of steel structure is small, light-weight, easier to transport and install, suitable for large span, high height, and heavy load structure.

2. Good Toughness And High Reliability
The steel is suitable for withstanding impact and dynamic load and has excellent seismic performance. Its internal organization structure is uniform, close to an isotropic homogeneous body. The actual working performance is more in line with the calculation theory. Therefore, the steel structure has high reliability.

3. High Degree Of Mechanization
Steel structural components are easy to be manufactured in factories and assembled on site. The factory mechanized manufacturing of steel structural components have high precision, high production efficiency, fast assembly speed, and short construction period. The steel structure is the most industrialized structure.

4. The Steel Structure Has Good Sealing Performance
Because the steel structure is a welded structure, it can be completely sealed and made into a high-pressure vessel, large oil pool, pressure pipe, etc. with good air-tightness and water-tightness.

5. Steel Structure Is Heat-Resistant And Not Fire-Resistant
When the temperature is below 150°C, the properties of the steel change little. Therefore, the steel structure is suitable for hot workshops, but when the surface of the structure is exposed to heat radiation of about 150 ℃, it should be protected by a heat insulation board. When the temperature is between 300℃ and 400℃, the strength and elastic modulus of the steel will decrease significantly, and when the temperature is about 600℃, the strength of the steel will tend to zero. In buildings with special fire protection requirements, refractory materials must be used for protection to improve the fire resistance level.

6. Poor Corrosion Resistance
Steel is prone to rust in a humid and corrosive environment. Generally, steel should be galvanized or painted and should be maintained regularly. For offshore platform structures in seawater, special measures need to be taken to enhance corrosion resistance.

7. Green And Environmental Protection
Demolition of steel structure buildings will produce almost no construction waste, and the steel can be recycled and reused, which is very environmentally friendly.